Joyetech Cuboid Tap Box Mod Kit

  • Ex Tax: $42.99
  • Product Code: M00002012
  • Availability: In Stock

Joyetech cuboid tap box mod kit, five fashionable colors available, support resistance as low as 0.05ohm under temp control mode, different output modes available, max output 228watts, powered by 2pcs 18650 batteries. the cuboid tap with joyetech TAPTEC technology, creatively developed the tap butto..

$42.99

Available Options

Joyetech cuboid tap box mod kit, five fashionable colors available, support resistance as low as 0.05ohm under temp control mode, different output modes available, max output 228watts, powered by 2pcs 18650 batteries. the cuboid tap with joyetech TAPTEC technology, creatively developed the tap buttons, paired with the pressure-sensitive system and vibration motor. cuboid tap backed with upgradeable firmware and multiple functions such as 2A quick charge, 1.3inch OLED display, clock, custom logo, preheat and reverse charging, with the new TAP buttons. equalizing charge technology was applied in order to bring all cells to an equal state of charge. adopts innovative buck-boost technology to provide much steadier output power. has 2A max charging current with which it can get fully chargerd more quickly normal ones. cuboid tap mod can be used as a power bank to charge other ecigs, only install the new reverse charging adapter on 510 connector.

check the cuboid tap vape box mod starter kit here

 

Features:

  • Size: 82*41mm*28mm
  • Material: Zinc alloy
  • Colors: Black, Silver, Red, Yellow, Blue
  • Output modes: power, clock, TC(NI, TI, SS316)/TCR(M1,M2,M3)/USB charge mode
  • Output range: 1-228W
  • The depth of 510 pins applicable: 4.0-4.5mm
  • Resistance range: 0.05-1.5ohm(TC/TCR)/0.1-3.5ohm(Power/clock)
  • Temp control range: 100-315C/200-600F
  • Battery: 2pcs 18650
  • Max charging current: 2A
  • Max output current: 50A
  • Pressure-sensitive capability applied
  • Equalizing charge system
  • Innovative buck-boost technology
  • Quick charge system
  • Power bank for reverse charge
  • Onboard reverse polarity protection
  • Dual circuit protection
  • Applicable for various tanks
  • Firmware upgradeable


Package:

1*cuboid tap mod

1*QC USB able

2*Manuals

1*Warranty card

2*Warning card

1*Spare parts

Note: please ensure you have basic knowledge on how to properly to use it.

1)users need pay attention to Li-ion cells when vaping.the batteries very sensitive to charging characteristics and may explode or burn if mishandled.so vapers must have enough knowledge of Li-ion batteries in charging, discharging and assembly before use. please use the fire-proof surface battery charger, never leave charging battery unattended.we will not responsible for damage for the human reason or mishandling of Li-ion batteries and chargers.the device always recommend work with rechargeable lithium-ion IMR batteries with min output current 20A or higher.

2) Smokstore will not responsible or liable for any injury, damage, defect, permanent or temporary that may be caused by the improper use of Li-ion battery, coils, tanks, mods etc.please have a basic knowledge of batteries.welcome to contact us anytime to get help.

Write a review

Note: HTML is not translated!
    Bad           Good